Kenics - Static Mixers
 |
KM Mixers
Versatile design covering all Reynolds number ranges for both blending and dispersion applications as well as specialty applications such as heat transfer, extrusion, plug-flow reactors, and solids dispersion. More...
Product Literature (PDF) |
 |
HEV Mixers
Offers the lowest pressure drop per degree of mixing of any static mixer available. This design is specifically designed for turbulent blending with Reynolds numbers above 10,000. The mixer can be applied to round pipe as well as square, rectangular and open-channel requirements. More...
Product Literature (PDF)
|
 |
KMX Mixers
This design was patented in 200_ in order to handle difficult mixing application within the laminar flow regime. Specifically, the mixer is intended for extreme viscosity and volumetric ratios within the laminar flow regime. More...
Product Literature (PDF) |
 |
Heat Exchangers
Kenics® Static Mixer technology, available exclusively in Kenics® Heat Exchangers, offers the highest available coefficients for fast, uniform heat transfer. Capable of reliable operation in a wide range of process applications, including those in the polymer, plastic, and food and beverage industries, Kenics Heat Exchangers require less space, less energy and less residence time than standard designs. More...
Product Literature (PDF) |
|
|
WVM Mixers
The WVM mixers consist of a simple wall additive injection point, a pre-distribution tab immediately downstream of the injection point and banks of trapezoidal shaped mixing elements. The number of banks of mixing elements varies depending on the mixture quality required for the process. The dimensions, angle of attack and spacing of the trapezoidal mixing elements varies between the WVM models A, B and C. The pre-distribution tab and the injection point design are the same for all WVM models. More...
Product Literature (PDF) |
|
|
|
