产品
興忠,Inc。設計,銷售,製造和服務的完整產品線攪拌機,高剪切混合器,靜態混合器,並根據我們的品牌興忠(齒輪傳動攪拌機和便攜式調音台)的名字熱交換器,廣柏(皮帶驅動攪拌器),Greerco(高剪切混合器),和SK型(靜態混合器和熱交換器)。
Chemineer
-
搅拌机
凱米尼爾攪拌器包括頂部,側面和底部進入單位使用的各種從小規模的試點應用到大生產的單位。產品包括直角和平行軸單元,齒輪減少,直接驅動和空氣驅動的設計。攪拌器可以安裝在橫梁/頻道,鉗安裝到油箱側,或法蘭安裝到所述容器具有多種密封選項。
-
叶轮
如果只有一個混合的工作要做,只有一個葉輪將是必需的。然而,有一個很寬的範圍中的攪拌的問題,並為一個應用程序最好葉輪可能不適合另一種最好葉輪。的描述和下面的討論旨在作為對葉輪選擇的指導。相對葉輪尺寸相比,P4在同等馬力和平等速度。
-
附加的
對於攪拌器輔助設備特定的系統,其中包括機械密封,密封潤滑系統,齒輪箱監控設備,如振動和溫度,穩定的軸承內部軸系和變速箱油過濾系統。
Prochem
-
普罗凯姆MD系列搅拌机
The MD Mixer's modular design, featuring innovative shaft bearing cartridges, allows longer operating runs between maintenance periods. Routine maintenance and overhauls can be performed without draining the tank or removing the mixer. -
普罗凯姆PB系列搅拌机
Prochem® PB Series Mixers combine the proven features of the MD Series with the advantages of a pillow block bearing design. You get truly efficient fluid processing plus maximum simplicity of maintenance. -
普罗凯姆VM系列搅拌机
Prochem VM Turbine agitators offer versatility and performance for optimum results regardless of the fluid being processed. The VM Series agitators are ideal for applications requiring high output speeds at medium torques. -
Maxflo WSE
A high efficiency, advanced side-entering hydrofoil impeller that produces maximum pumping action. It has more cavitation resistance than other designs through effective hydrodynamic design. -
Maxflo Mark II & III Impellers
High efficiency, high solidity impellers for use in turbulent side entering applications. They are especially effective for fluids possessing a yield value, such as paper stock. The high solidity permits operation nearer the boiling point without cavitation.
Kenics
-
系列混合器
In all Kenics® KM Series Static Mixers, a patented helical mixing element directs the flow of material radially toward the pipe walls and back to the center. Additional velocity reversal and flow division results from combining alternating right- and left-hand elements, thus increasing mixing efficiency. All material is continuously and completely mixed, eliminating radial gradients in temperature, velocity and material composition. -
系列混合器
For demanding mixing applications, such as those involving fluids with widely disparate viscosities or volume ratios, the common limiting factor in static mixer design is the allowable mixer length. The KMX was patented in 2002 and enhanced in 2012 to handle difficult laminar flow mixing applications. Specifically the mixer is intended for extreme viscosity and volumetric ratios. -
系列混合器
The patented tab geometry of the Kenics® HEV Static Mixer maximizes the conversion of turbulent energy into efficient mixing for a variety of line shapes and sizes. The mixing elements take advantage of the naturally occurring vortices induced by the element edges to produce complete stream uniformity. -
系列混合器
UltraTab mixers provide rapid mixing in short distances common in water treatment, desalinization plants, and chemical processing applications. A low pressure drop through the mixer provides energy savings to the process. -
系列混合器
The WVM mixers consist of a simple wall additive injection point, a pre-distribution tab immediately downstream of the injection point and banks of trapezoidal shaped mixing elements. The number of banks of mixing elements varies depending on the mixture quality required for the process. The dimensions, angle of attack and spacing of the trapezoidal mixing elements varies between the WVM models A, B and C. The pre-distribution tab and the injection point design are the same for all WVM models. -
换热器
Kenics® Static Mixer technology, available exclusively in Kenics® Heat Exchangers, offers the highest available coefficients for fast, uniform heat transfer. Capable of reliable operation in a wide range of process applications, including those in the polymer, plastic, and food and beverage industries, Kenics Heat Exchangers require less space, less energy and less residence time than standard designs.
Greerco
-
管道搅拌机
Greerco® Pipeline Mixers are designed for in-line continuous high-speed, high-shear homogenizing, mixing, emulsifying and rapid dispersing. The Pipeline Mixer offers several mixing heads, each having the ability to handle a range of mixing applications. -
均质器
Greerco® Homogenizers from Chemineer are high-speed, high-shear batch mixers ideal for fast blending and homogenizing of materials through a wide range of viscosities. -
胶体磨
Greerco® Colloid Mills are highly efficient, in-line, processing units specifically designed to disperse solids and/or liquids into a carrying vehicle rapidly and uniformly. Any emulsion or suspension - liquids in liquids or solids in liquids - can be reproduced repeatedly with unvarying particle-size accuracy and distribution. Greerco Colloid Mills produce stable emulsions to the submicron range.